MSR 385WD Multi-channel Measuring System: Wireless Sensor Data Logger up to +125 °C, Remote Control via LTE or LAN Terminal

MSR 385WD Multi-channel Measuring System: Recording temperature, humidity, and pressure values at various measuring points, in hard-to-reach places, between -20 °C and +125 °C, with MSR SmartCloud monitoring system: the MSR 385WD Multi-channel Measuring System data logger comes with wireless sensors that are accessible via GSM terminal

MSR 385WD Multi-channel Measuring System: Heat-resistant MSR385SM transmitter modules for long-term data recording

MSR 385WD Multi-channel Measuring System: The transmitter modules forward the data from temperature, humidity, and pressure sensors to the data logger via the ISM channel at 868 MHz frequency.
MSR 385WD Multi-channel Measuring System: Due to their heat resistance, the MSR 385SM units can operate in environments up to 125 °C, depending on the type of casing. Their compact housing allows for applications in hard-to-reach measurement locations, such as rotating machinery or museum display cases.

MSR 385WD Multi-channel Measuring System: Depending on the frequency of the measurements and radio transmission, the units can be powered for up to 10 years.

MSR385WD: Receiver Station with LTE or LAN and USB Interface

MSR 385WD Multi-channel Measuring System: The central element of the wireless measuring system is the MSR385WD data logger, which has a memory capacity suitable for recording more than a million data points. Thanks to the integrated ISM channel module, it can store signals from up to ten MSR 385SM transmitter modules. The data logger can be recharged via USB, with a built-in 2400 mAH Li-Po battery that can operate independently without recharging. The flash memory ensures data integrity in case of power outages. The colored OLED display allows for on-site reading of the measured values from the transmitter modules.

Ideal for Remote Monitoring, Data Accessible via MSR SmartCloud

MSR 385WD Multi-channel Measuring System: The measured and recorded data from the wireless transmitter modules can be read with the data logger. The data can be transmitted via USB for later analysis (MSR PC software). Alternatively, you can use the optional LTE/LAN terminal to access the mobile network and send the data to the MSR SmartCloud. With the MSR cloud-based service, users can store data received from the LTE/LAN terminal on a server via the Internet. This way, measurement data can not only be downloaded and analyzed from anywhere, but alerts can also be received via MSR SmartCloud if measurements exceed set limits. If needed, various data measured by different MSR units can be shared with others.

Configure Your Custom MSR385WD Data Logger

With just a few clicks, you can select and request a non-binding quote for the desired MSR285WD. If you need multiple transmitter modules with different configurations, request a custom quote for each setup. Simply provide the data logger configuration selected in point 3. Transmitter modules and data loggers can be ordered independently.

1. Choose the Temperature Range and Casing for the MSR385SM Transmitter Module

The temperature range to which the device will be exposed determines the casing that can be used. Please select the casing you need. This applies to the transmitter modules, while the data logger is specified in point 3.

Temperature range	Enclosure and cell	Image	Size and weight	Medium	Product code
-20…+125 °C	Silicone tube, replaceable 800 mAh Li-SOCl2 cell, non-encapsulated, IP 60		35 x 25 x 55 mm approx. 25 g	Air	385SMB63 Error Select
	Silicone tube, replaceable 800 mAh Li-SOCl2 cell, encapsulated, waterproof IP 67		35 x 25 x 55 mm approx. 40 g	Air, other liquids	385SMB64 Error Select
-20…+85 °C	ABS enclosure, replaceable 3600 mAh Li-SOCl2 cell (> 10 years 15-minute transmission interval), external antenna, non-encapsulated, IP 64		60 x 33 x 80 mm Antenna length: 93 mm approx. 120 g	Air	385SMB66 Error Select
-20…+65 °C	ABS enclosure, replaceable 260 mAh Li-Po battery, non-encapsulated, IP 60		38 x 15 x 78 mm approx. 45 g	Air	385SMB65 Error Select

2. Choose sensors for the MSR385SM transmitter module.

Connect up to 3 external or internal sensors per module. We continuously expand the combination of these sensors!

3. Choose the MSR385WD data logger.

If you already have an MSR385WD data logger and only want to order a transmitter module, then skip this.

General technical data for the MSR385WD wireless data logger		Instrument No.
	A data logger operating in the 868 MHz ISM band that receives and stores measurement data. It can receive data from up to ten MSR385SM transmitter modules. Flash memory saves data in case of power outage. Display on a brilliant, high-contrast OLED (organic light-emitting diode) color screen. Size: 75 x 25 x 120 mm with antenna Antenna: 85 mm Memory: More than 1 million measured values Power supply: Lithium-polymer battery 2400 mAh (2 days operation) | USB charger LED: Blue: recording Red: alarm Yellow: battery status indicator Push button: Menu functions control on the OLED display Connector: USB, GSM terminal (EU) PC software: Free installation, Reader, Viewer, and Online software (Windows 7/8/10) for data recording and evaluation. Operating conditions: -20 °C to +65 °C. Storage conditions: +5…+45 °C (ideal for battery storage). 10…95 % relative humidity, non-condensing environment Certification: The MSR 385WD complies with the EU RoHS / WEEE standard.	385WDB61 Error Select

4. Do you need an LTE terminal to send measured data to MSR SmartCloud?

An LTE terminal will be needed if measurement data is to be sent to MSR SmartCloud via a mobile network. A LAN terminal will be needed if measurement data is to be sent to MSR SmartCloud via LAN.

5. Using MSR SmartCloud.

The cloud solution managed by MSR Electronics GmbH stores the data recorded by MSR data loggers in a database. With online access to MSR SmartCloud, you can view your measured data, manage them, and create alert messages. When ordering the MSR385WD data logger, you will automatically receive your access code to MSR SmartCloud.

Selected: