PCB 682C23 vibration transmitter unit - Sensor power supply and vibration signal processing transmitter unit for implementing machine monitoring based on PLC, DCS, and SCADA systems

• built-in sensor power supply (4 mA)
• connectable sensors: ICP sensors (with arbitrary sensitivity)
• selectable frequency ranges by type: 3Hz ... 10kHz: 682C03 3Hz ... 1kHz: 682C13 10Hz ... 10kHz: 682C23 10Hz ... 1kHz: 682C33
• output signal 4...20 mA and 0...5/10 V DC vibration acceleration, vibration velocity, and displacement
• selectable signal processing: without integration, single or double integration
• selectable signal scaling: peak or effective value
• temperature output signal 4...20 mA (for PCB TO temperature output sensors)
• compact size (99 x 22 x 126.5 mm), mountable on standard DIN rail
• power supply requirement: 24 V DC

The devices of the PCB 682C_3 series are primarily used to connect ICP-type (with built-in charge amplifier) piezoelectric industrial acceleration sensors to process control, PLC, DCS, and SCADA systems. The use of these units enables existing systems to provide continuous vibration-based machine monitoring.

The devices are available in single-channel versions for receiving ICP-type (with built-in charge amplifier) piezoelectric vibration acceleration sensors of arbitrary sensitivity. The devices provide power supply to the sensors.

The devices of the PCB 682C_3 series generate a 4...20 mA current signal and a 0...5/10 V DC voltage signal - selectable by type - with fixed lower and upper frequency limits, in peak or effective value. It is also possible to choose whether the output signal should be proportional to vibration acceleration, vibration velocity (with single integration), or displacement (with double integration).